Bear Hemera Files Available (Patreon)
Content
Update 2 April 2020: All files are now available on Github here: https://github.com/gregsaun/bear_extruder_and_x_axis/tree/dev/optional_parts/bear_hemera
Dear Patrons, please find attached to this page a zip file for the Bear Hemera. You will find all information in the README.pdf (print settings, bom, link to assembly guide, etc.). Please note that the X ends, X carriage back and cable guide back are available in the dev branch of the github here: https://github.com/gregsaun/bear_extruder_and_x_axis/tree/dev/printed_parts and therefore not present in the zip file.
The assembly guide is not finished yet, I will work on it next week. The basic assembly is done and you will find gcode files to help configure the printer as well as PrusaSlicer. This should allow you to start printing with the Hemera but be aware that some routines are untested and might require tweaking. Btw, you don't need to flash a custom firmware!
This first alpha release is only shared with you. Feel free to report me any issue you could find, small or big. Do not hesitate to ask questions, even simple one. If you have a doubt during the assembly please share a comment here. Thanks a lot in advance for your help :) !
I will have only slow access to Internet during the weekend but I promise I will read and answer your questions as soon as it is possible.
Disclaimer: This is an early access to a work in progress. It might require further modifications and research to achieve a print with the Hemera on your Prusa. Therefore, We cannot be responsible for damages on your products caused by this upgrade.
Change Log:
- 20.02.2020 - Zip file version 0.1 : First release to Patreons
- 28.02.2020 - Zip file version 0.2 : Fix homing position for MK2S