Home
Artists
Search Recent Random
Posts
Search DMs Popular Hash Lookup Tags Random
Importer
Import FAQ
Register
Partychan Telegram Live Sex ThePornDude
Home Artists Posts Import Register

PSA - Hotends Not Supported by Hero Me Gen7 (Patreon)

Published:
2023-04-13 19:50:00
Imported:
⚑ Flagged

Downloads

Content

UPDATED 6-8-2023: Updated the attached PDF with all the latest details on hotend and 3D printer support.

UPDATED 5-26-2023: Updated the attached PDF with all the latest details on hotend support. Also added information regarding intergrated extruder/hotend combos.

The following hotends are NOT supported by the Hero Me Gen7:

  • Haldis Red Lizard Q1
  • Creality CR6 SE stock hotend (Micro Swiss All Metal CR6 SE)
  • Creality Ender 3 Neo stock hotend (3 V2 Neo, 3 Max Neo)
  • Phaetus DropEffect XG5 (supported by Hero Me Pro)

The following Integrated extruder/hotends are not compatible with the current Hero Me Gen7 design architecture.

  • BIQU H2
  • Bondtech LGX Sidekick
  • Creality Sprite S1
  • E3D Titan Aero
  • E3D Hemera
  • Micro Swiss NG
  • Others of this design style

Those listed above are all too large and too wide to fit into a Hero Me Base. In regards to the integrated extruders, I will be developing specific solutions based upon the Hero Me part cooling ducts with ABL/ADXL345 mounts for as many of these integrated extruder/hotends as is possible. ETA sometime in the Summer of 2023.

While the Hero Me Gen7 supports the new Creality 'Neo' family of 3D printers (Ender 3 Neo, Ender 3 V2 Neo, and the Ender 3 Max Neo), the stock hotend used in the 'Neo' family of 3D printers is not supported.

This hotend, along with the others shown above, are the few hotends that the Hero Me system can not support. The maximum width for hotends that will fit in the Hero Me Gen7 Base is 26.8mm wide. The hotends shown range from 29mm-38mm wide. The Creality 'Neo' hotend is currently only found in the three Creality Ender 3 based 'Neo' models.

If you have a 3D printer that has one of these hotends and you want to upgrade your printer to take advantage of the Hero Me system, replace the hotend with one from any of the fully compatible hotends listed below.

Over 46 hotend models are supported by the Hero Me Gen7:

  • Anycubic Vyper V5 Stock
  • Creality Stock MK8 (2 screw mount, found on Ender 3, Pro, V2, CR-10, etc.)
  • Creality CR-10S Pro (2 screw mount)
  • Creality Spider (350c max)
  • Creality Spider High Temperature (500c max
  • Creality Spider 3 Pro
  • Creality Spider 4 Pro (aka: Speedy Ceramic)
  • E3D-Online V6
  • E3D-Online Volcano
  • E3D-Online Revo Six (aka Prusa MK3)
  • E3D-Online Revo Micro (aka Mini)
  • E3D-Online Revo Voron
  • E3D-Online Revo CR
  • Haldis Red Lizard K1 V6 (Dragon)
  • Haldis Red Lizard K1 PRo-HF-UHF
  • Haldis Red Lizard V5, V5 Pro
  • Generic MK8
  • Generic J-Head V5, V6
  • Micro Swiss All Metal CR-10
  • Micro Swiss All Metal CR-10S Pro
  • Neptune Stock
  • Phaetus Dragon
  • Phaetus Dragonfly BMO-BMS-HIC
  • Phaetus Rapido (aka ST, HF)
  • Phaetus Rapido Plus (aka UHF)
  • Phaetus X Voron Dragon ST-HF-UHF
  • Phaetus TaiChi
  • Slice Engineering Copperhead
  • Slice Engineering Mosquito
  • Slice Engineering Mosquito Magnum
  • Slice Engineering Mosquito Magnum+
  • Slice Engineering Mosquito for Creality
  • TriangleLab Dragon SF-HF
  • TriangleLab Rapido HF-UHF
  • TriangleLab CHC, CHC Pro, PT1000 Pr, CHC PT1000 Pro
  • TriangleLab TCHC TR6
  • TriangleLab CHC Mini
  • Clones of any hotends above (note: look-alikes may not fit, just true clones)

Files

Comments

Anonymous

will you be making a HMG7 for the ender 3 s1 series? or do you have one that will work with it?

Andrew Soderberg
>>107326100

I am sorry but integrated extruder/hotends including the Ender S1 Sprite (along with the Micro Swiss NG, Titan Aero, BIQU H2, E3D Hemera, and the Bondtech LGX Shortcut), are not compatible with the current Hero Me design architecture (including Gen7). They are all too large, too wide, to fit into a Hero Me Base. The Hero Me was designed before these integrated extruder/hotend combos were developed. To make a Hero Me fit these assemblies it would no longer be a Hero Me as it would not be compatible with any of the hundreds of parts from both my Master Suite and the over 650 remixes and add-ons created by the community. On a more positive note, I have partnered with another 3D designer/ mechanical engineer to develop Hero Me based part cooling ducts with ABL mounts for the Ender S1 Sprite and the others listed above. We hope to have them available in the near future.