Hero Me Gen6 - Creality Spider Hotend support (Patreon)

UPDATE 1/21 10:30AM: If you have a Creality Spider AND are going to mount it with screws (and not the E3D style groove mount) you will need a new gantry adapter because the heat sink of the Spider is thicker. I have the Ender 3 V2 Gantry Adapters for the  Spider completed. I have attached these to this post. 

Note: There are two versions of the Gantry Adapters for the Ender 3 V2. This is because Creality (in their infinite wisdom) changed the X carriage at some point. So there is no way for me to know which you have. You may need to print both to see what lines up.

If you will be mounting the Spider using the groove mount, you can use the gantry adapter associated with your printer/model.

If you have a different model (or brand) of printer and want to mount it with the screws, I am making Spider specific Gantry Adapters for the rest of the 3D printers/models supported by the Hero Me (because the heat sink is so much thicker).  

This will take a couple days to complete and post. I am also still working to complete the Hero Me DD Bases to support the Spider.

----------------

Just got the new Creality Spider all metal high-temp hotend from Amazon, only $50 (love the Prime overnight delivery).  I have just created two new base files to support this new Creality hotend. It is larger than most (wider and thicker and taller), much larger than stock Creality hotends. I am looking forward to putting it though its paces, printing Nylon, ASA, Carbonfiber PETG, and PC. It came with .4mm and .6mm nozzles. 

The new STLs are: HMG6 Base Creality Spider screws.stl, HMG6 Base Creality Spider collar.stl, and HMG6 Creality Spider collar.stl They have been posted to the Thingiverse project. I will update the PDF this evening with these additions.

 I will be updating DD Bases to support this new hotend this week.