TitanOrbiter - Beta - dual 4010 (Patreon)

---

Update May 2nd: - untested yet, but should work

• updated ducts (different from the zip model):
  Right duct - new.stl
  Left duct - new.stl
• Same update but with volcano height ( with normal non-volcano main body):  
  right_volcano_new.stl
  left_volcano_new.stl

---

I've decided that all future iteration of the shroud will be named after Saturn's moons because they will be inspired by the SaturnOrbiter, the big one, and either have direct backplate compatibility, or similar backplate mounting system.  

All the major kinks have been worked out (Thanks to Kris Stankievech aka kStank), so its' now entering Beta phase. Will likely go though changes, but it's a fully functional package as it is now.

This has full compatibility with the Saturn backplate, get the backplate from the Saturn files here 

If the main body for your hotend is not here, let me know and I'll make one.

BLTOUCH:

 X offset is -48.8

Y is -12.14 for stock/Dragonfly BMS type hotend

Y is -6.64 for V6/Dragon/Dragonfly BMO type hotend

CRTOUCH

 X offset is -46.3

Y is -11.93 for stock/Dragonfly BMS type hotend

Y is -6.43 for V6/Dragon/Dragonfly BMO type hotend

Fans are not secured by screws, but just slides in, and then held by the full size cable cover / roof

Updates:

Feb12 

• Right fan cable routing fixed
• new roof, acting as both cable cover and side fan holder

Feb14

• Dedicated main_body for a few hotends, redusing air spill onto the heatblock, and better target the heatsink (DragonflyBMS, Dragon, DragonflyBMO, Rapido)
• new roof updated, acting as both cable cover and side fan holder

Feb 15 - bltouch/crtouch offset changed, see above

• new roof updated, acting as both cable cover and side fan holder, with larger opening for bl/crtouch
• a second roof with a gap upfront to later snap a front fan cover
• crtouch dedicated mount, move closer to body, and 1 & 2mm lowered option from standard height
• bltouch tweaked, slightly closer to body
• updated body, large opening for side fans, and large opening for cable of right fan
• also added more hotend dedicated main body

Feb 19 

• temporary removal of everything (due to breaking compatibility changes between backplate and main body) thing will  be reuploaded soon
  If you want to test a hotend with this, let me know in the comment and I'll upload it sooner (as I did with the e3dv6)
• E3dv6 pack added
• two version of the roof included, one without a notch, and one with a notch for a fan cover, see last picture for an idea of what it would look like (so if you want the upcoming fan cover, print the notched version)

Feb 21

• Added the updated main body for all the currently Titan supported hotend (if you don't see one for your hotend, but is supported by the Saturn let me know and I'll add it), loses backplate compatibility with older Saturn backplate, get the updated backplate from the latest Saturn update
• double check your bltouch/crtouch offset values, they are supposed to be all negative, had them positive for a few days on this post