Download - Pirate Ship - The Menace (Patreon)
Content
Hello, we have finally finished the pirate ship "The Menace" after restarting the project three times! But in my opinion the final result was worth the wait. It will have 52 parts (46 main ship and 6 wave base), but most of the mast parts can be printed together. And every part fits into a resin printer!
"The Menace" has playable interior. You access the bottom by removing the top part and you can also access the captains cabin. Keep that in mind and don't accidentally glue those parts together.
If you are using a resin printer, I would strongly advise not to print on the build plate directly. Printing on the build plate will deform the first few layers and you will struggle putting the ship together later on.
Download Link:
https://www.dropbox.com/sh/t5scjru3tfgdwy6/AAAH5a2QMB368Ahdz-VzqVPva?dl=0
A quick building manual:
- Print and build the bottom part of the ship and put is aside
- Print and build the top of the ship, DON'T glue the top of the stern
- You can place the top part on the bottom part but DON'T glue them if you want playable interior!
- Print and build each mast individually
- Glue masts on ship
- Print and glue the Ragging, anchor and ships wheel
- (Optional) Print and build the base
- Print and place canons that are included in this download
If you have questions, you can ask in the comments or message me.
Hope you will like this ship. We definitely enjoyed making it. As always, comments and feedback are welcome. 😃
Thank You!