Updates: Bigger Skullcube, Hazard Crates, Torture Copter (Patreon)

Hazard Label Crates

The Hazard Crates from a little while back now have a bunch of new sizes!  Perhaps more importantly, though, they now include a panel for attaching the standard 12mm printed labels commonly used by label maker machines.  The lid is exactly the same as before - it's only the main container bodies that are new.  Here's a render of all the sizes, because I've only test printed the first two so far :)

You'll find these at at 570 Hazard Label Crates

Link to dropbox post: https://www.patreon.com/posts/31697592

Larger Skullcube!

The original little Skullcube didn't quite fit a set of dice!  So, here's a larger one (150% size, from memory?) that'll fit two sets with room to spare, and features four magnets for a more secure lid closure!

You'll find this one at at 569 Larger Skullcube

Link to dropbox post: https://www.patreon.com/posts/31697592

Torture Copter Improved Landing Gear

While the Torture Copter does feature the get-out-of-jail-free card of having "torture" in the title, the landing gear did feature some angles that were a bit brutal to print neatly.  So, there's now a revised version that cleans that up and makes it all more manageable.  It's just as precariously balanced on its top while printing, though :)

New landing gear is in place for both the single- and multimaterial versions!

You'll find this one under the original folder: 571 Torture Copter

Link to dropbox post: https://www.patreon.com/posts/31697592

Rechained Hatch Container with Lid Movement Restriction

If you found that your Hatch Containers Rechained were prone to having the lid thread slip when tightened, you might want to try this version!  It reduces the overall space the lid thread has to move away from the container thread, to keep things neatly meshed together.

You'll find this one at at 576 Hatch Container Rechained\Lateral movement restriction

Link to dropbox post: https://www.patreon.com/posts/31697592