A Taller Jigsaw Bolt! (Patreon)

Just a quick write-up for this one!  There's a new, taller set of body pieces for the Jigsaw Bolt!  It's otherwise the same as before - just with a few extra thread windings :)

Printing Tips

To reiterate...

This is an assembly rather than a print-in-place design, and so much more tolerant to print issues.  The tolerances between parts is 0.5mm as usual, though, which should be more than generous for fitting things together.

Orientation for printing is the same as the original parts, i.e. base-down for the body segments.

File Location

You'll find this on Dropbox in the same directory as the original models - under 778 Jigsaw Bolt

(Dropbox link post: https://www.patreon.com/posts/dropbox-and-are-31697592 )