Bear extruder and X axis (BearExxa) 1.0.0 release (Patreon)
Content
Hi everyone, as you might have already seen the Bear extruder and X axis 1.0.0 have been release! To reduce the long "Bear extruder and X axis" name I have now set a shorter nickname called BearExxa.
Full release note: https://github.com/gregsaun/bear_extruder_and_x_axis/releases/tag/1.0.0
Main page: https://github.com/gregsaun/bear_extruder_and_x_axis/blob/master/README.md
What's new ?
- Now compatible with E3D Hemera (BearMera)
- Tighter PINDA mount
- Self centering of X motor mount
- X carriage reinforced
- Cable guide back for extruder wires is now compatible with 2.85mm nylon filaments for the cable guide
- Documentation has been improved to make things easier and cleaner to navigate and find information
- Other smaller improvements
- Bear calibration firmware is now in version 3.9.0 (based on latest Prusa firmware 3.9.0)
What's new for Hemera since last Patreon-only release?
The part pinda_mount.stl has been beefed up a little bit, not necessary to update.
Compatibility
Please check this page: https://github.com/gregsaun/bear_extruder_and_x_axis/blob/master/README.md#compatibility
Parts that needs to be replaced since release 0.7.0-beta
Here is a list of what you should replace or not from Bear extruder and X axis 0.7.0-beta:
- Want to use the E3D Hemera extruder -> replace all parts
- Your PINDA mount is getting loose -> replace extruder_body and extruder_cover
- Your X carriage has some cracks around square nuts -> replace x_carriage and x_carriage_back
- You are using a 2.85mm filament to guide the extruder cables -> replace cable_guide_back_a and cable_guide_back_b
Special thank you
- To E3D-Online for being very supportive and having sponsored the development with a free Hemera
- To Florian Daeubler for precious help on documentation, support as well as developing the E3D Volcano adapter for BearMera
- To My Patreons for being very supportive during the BearMera development
- To David Ogles for his excellent support to the FB community
- To "The 602 Wasteland" community for their support and help
- To Twitter 3D printing community for their encouragements
- To Bear upgrade FB community for their support and help
- To Tom Jackson for having tested the BearMera and shared a lot of impressive print
- To official distributors for their support and work
- To LDO Motors team and Jason Yiming Bao for their support and work