Bear 2.1 Z axis (Patreon)

Finally I am ready to share the new Z axis for Bear 2.1. The re-design of the Z tops is now ready. The Z motor mount got some improvements since the last time I shared it with you.

This is only for Bear 2.1frame (same as Bear 2.0 MK3 frame) and it is not yet compatible with Bear 2.0 MK2S or MK2.5S frame. If you have a doubt about your frame you can check this page: https://github.com/gregsaun/prusa_i3_bear_upgrade/tree/dev/optional_parts/y_belt_holder_for_bear2.0_mk2s_mk2.5_mk2.5s

The assembly instructions are not ready yet but they are very close to the current stable version. Screws are the same but the Z motor mount now use only 2 screws.

Changes since the last time I shared it with you:
- Clearances refinement
- Reduce chances of warp during the print
- Version for MK2S/2.5S has been created
- Several small bugs and improvements

 You can download the zip file from the attachment bellow. Use the print settings from the dev branch here: https://github.com/gregsaun/prusa_i3_bear_upgrade/blob/dev/manual/print_settings.md . 

This version is shared with you only and might still change before the release.