Home
Artists
Search Recent Random
Posts
Search DMs Popular Hash Lookup Tags Random
Importer
Import FAQ
Register
Partychan Telegram Live Sex ThePornDude
Home Artists Posts Import Register

The Soulmonger is ready! (Patreon)

Published:
2019-01-17 15:55:00
Imported:
2021-11

Content

The Soulmonger from TOA is ready for 3D Printing! Its been split up into pieces so you can print it FDM. Use a hot hair dryer on the tentacles after you glue them into the top portion. 

The files are in the TOA folder in the Share Drive. You can also grab it here on this link, though you need to split it up first. Enjoy! 

Files

The Soulmonger by mz4250 on Shapeways

The Soulmonger (NC44JKXNW) by mz4250 on Shapeways. Learn more before you buy, or discover other cool products in Tabletop & Wargaming.

Comments

Anonymous

Thanks. I was the one that asked about this on FB. This will be much better than the popsicle sticks and plastic bottle I was working with, and just in time.

Anonymous

To anyone printing this, according to the board I've made of this, which is as close to scale as I could do, you need two struts at about 5" and one at about 3.5". Otherwise, they go way beyond where they should. I plan to just cut mine down. Scaling in Cura makes the bases thinner, but you can probably adjust them with the blend files or in meshmixer maybe. Can't wait to get it all painted. Thanks again Miguel.

Anonymous
>>19041420

Yeah, I printed them at full size. It should be pretty easy to trim them. I just wanted to give people a heads up before they get everything painted and all if they're wanting to match the scale.

Anonymous

Any suggestions on printing the tentacles? Supports? Brim? Just wondering what these are going to come out like.

mz4250
>>48952872

Print them flat with brim and supports. Then run then under a hot hair dryer to warp them however you want.