Home Artists Posts Import Register

Content

Hey everyone!

A lot of y'all really liked the little dragon keychain container, so I put together a fox one as well, of course :) These have turned into one of my personal favorites and one of my top 3 designs I use in life every day.

Print recommendations:

*2-3 walls

* 10-20% infill

* Add a brim to the lid piece if needed (especially the notched one)

* Feel free to play around with smaller or larger sizes

* 2 head versions included! The whole head which may screw on straight for some, or the head with 2 pieces, with the screw you screw in first, and then the head with varying notches to glue into the screw piece. Due to different tuning of printers and filaments, not all printers may screw on completely straight with the full head, which is why the adjustable head is included and can be glued together once the correct adjustment is found.

Model link: https://www.kekreationsart.com/patreonmod

Refer to the pinned Patreon post here for the site password! (Once you use it once your device should remember it for next time) https://www.patreon.com/posts/3d-model-access-82725512

Hope y'all enjoy this one!

Thanks so much for all your support!

- Kek <3

Files

Comments

No comments found for this post.