Fox Magnet and Keychain PATREON EXCLUSIVE (Patreon)

Hey everyone,

Time for another Patreon exclusive set! The fox magnet/keychain set :). The fox has one of my favorite head models <3 Hope y'all like this little guy!

Print instructions:

* 2-3 walls

* 15-20% infill

* No supports

* Photos here are done with 0.2 layer height, for higher detail you can print at 0.1 layer height

* Magnet is made for magnets with 1 inch diameter and about 4.5-5mm thickness. I secured mine in with a small dab of superglue and they're golden! I went with the glue-in magnets vs print inside magnets because I wanted to ensure the magnets would be as strong as possible, and any layers of filament between the magnet and surface it's on would weaken that strength.

Find the file in the Google Drive linked for Patrons here https://www.patreon.com/posts/3d-model-access-82725512 You'll find the file in the "Patreon Exclusives" folder, files "Fox Magnet" and "Fox Keychain"

Hope y'all enjoy it! Thanks for all your support <3

- Kek