ZOU OCTOPUS (Patreon)

This model was released in 08/2023!

This design was released to members of the month. But you get a discount on your purchase, check out the information in the link below!

• ZOU3D ->  ZOU3D - Info and Download Links

If you are new to Patreon!

If you have a question, please! Send a message to support@zou3d.com, this is our main communication channel!

We’ll help you! ❤️

If you were a member and didn't receive the files! send us an email support@zou3d.com !!!

This octopus is insane, tentacles and suction cups articulated!!!

One of the most difficult models I have ever made, it was 2 months of development and several several several several tests.

👉To print you must be aware of some tips!

👉👉 Print the file "Zou_Octopus_TEST.stl", to test if your printer is calibrated to print this model!

👉👉 Print the file "Zou_Octopus_TEST.stl", to test if your printer is calibrated to print this model!

Be careful when taking the model off the print bed!

Be very careful when taking the model out of the print bed to make sure the tentacle suction cups don't break! Using a flexible bed makes everything easier!

Beware of filaments with moisture! Filaments with moisture are very fragile and can prevent you from successfully printing this model.

Calibrate your z-Offset and the temperature of your printing material so that the tentacle suckers do not stick together.

Print settings - (Read the tips)

Wall line count: 4

Infill(Gyroid): 20% or more

👉👉Print the file "Zou_Octopus_TEST.stl", to test if your printer is calibrated to print this model!👈👈