Home
Artists
Search Recent Random
Posts
Search DMs Popular Hash Lookup Tags Random
Importer
Import FAQ
Register
Partychan Telegram ThePornDude
Home Artists Posts Import Register

ZOU GHOST (Patreon)

Published:
2022-09-20 15:51:04
Edited:
2024-01-31 23:19:11
Imported:
Tags:

Content

This model was released in 09/2022!

This design was released to members of the month. But you get a discount on your purchase, check out the information in the link below!

If you are new to Patreon!

If you have a question, please! Send a message to support@zou3d.com, this is our main communication channel!

We’ll help you! ❤️

If you were a member and didn't receive the files! send us an email support@zou3d.com !!!

Print settings:

Wall line count: 3-4

Infill: 30%

Files

Comments

Anonymous

My ghost file got corrupted, i came back to re-download and its not available anymore? :(

Anonymous

I was a member when this was available but lost the files. I resubbed but can no longer download :(

Anonymous

I got this file last year and lost my copy. How do I get it again?

Anonymous

Has anybody printed these in resin? if so, how did it go?

zou3d
>>93561344

I saw a person on Tiktok who did this I don't know how he did it, I'm still improving my resin skills to become an expert

Anonymous
>>93561344

They came out perfect in resin. My wife got me do the keychain and it's definitely strong enough

Anonymous

I’m getting reports from a lot of people on a Facebook page. That say the cults file is messed up. The legs keep breaking for them. I have not had issues. But one mentioned they had to repair the stl file. Section of leg was missing

Anonymous
>>93561344

I just finished a clear blue on in resin. Turned out great. Printed flat on the build plate. Didn't size it up or anything. Sidenote I need a flex plate for this Saturn 2.....smh.

Anonymous

I printed it in 10cm Height. Took Like 5,5 hours.. Looks perfect. Anybody has some ideas to Print it faster?

Anonymous

How much infill should i use for 100% and 150%?

zou3d
>>93569930

Thank you very much for letting us know, this error is very strange

zou3d
>>93684133

Up to 150% I use 0% infill. On the keychain I use 20% infill because carriers don't take care of the packages 🤣

Anonymous

I’m printing at 300% with a 20% infill, I keep getting layer shift half way through the eyes- any advice how to stop it? Thanks

Anonymous
>>93561344

I've been trying to get a resin version to work but I can't get the legs to free. How much x,y compensation are y'all using. I printed at 150% and 102% comp.

Anonymous
>>93569930

I had the same problem with the file from here in ideaMaker. Ran the slicer's repair, then it printed fine.

Anonymous

what resolution would be good for the key chains .15?

Anonymous
>>93569930

was it with the right leg? I first had a notification in cura, but ignored it and it has been ok for me so far. I did notice the right leg was weaker and I had one break after printing

Danielle Ruiz

Any suggestions for strengthening the legs? It prints beautiful, removes from the plate perfectly but right at the "sock" line it's very weak and the slightest fall and they snap, I've broken several finished products, including the candy corns. TIA.

zou3d
>>95218022

Hello! I use the Gyroid infill (It fills the inner folders better), 4 walls and 20% infill for the keychain, some filaments have different strength (moisture can cause this), reducing speed can also make the dent between the layers stronger

Danielle Ruiz
>>95218022

Thank you! I love all your designs. The ghost is my favorite. I will try the suggestions

Anonymous

anyone else having issues getting him to stand and keeping his legs from going back up?

Anonymous

I love this. I tried printing and found this model to be very clean, smooth and cute.