Home
Artists
Search Recent Random
Posts
Search DMs Popular Hash Lookup Tags Random
Importer
Import FAQ
Register
Partychan Telegram ThePornDude
Home Artists Posts Import Register

BABY AXOLOTL (Patreon)

Published:
2022-09-01 20:29:22
Edited:
2024-01-31 22:49:02
Imported:
Tags:

Content

This model was released in 09/2022!

This design was released to members of the month. But you get a discount on your purchase, check out the information in the link below!

If you are new to Patreon!

If you have a question, please! Send a message to support@zou3d.com, this is our main communication channel!

We’ll help you! ❤️

If you were a member and didn't receive the files! send us an email support@zou3d.com !!!

Files

Comments

Makers Ace

would it be possible to make a keychain version of this similar to the keychain version of the alligator?

Terri Trōtter

this has consistently been a best seller for me at my craft shows. The sales alone on this design pays for your monthly Patreon. Thanks for a great design!

Anonymous

Is there a multi material file for this item? :)

zou3d
>>106434295

https://www.patreon.com/posts/little-baby-79395071?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link In this version there is the 3mf file, I am making the 3mf file of the older models

Nastassia Zamora

Omg LOVE!!!! And I’m so excited for the ghost!!!! I love cute creepy thinngs

Anonymous

What are the recommended print settings for the baby?

zou3d
>>92587172

usually i use these settings layer height - 0.2 mm wall thickness - 1.2mm Infill - 20%

Anonymous

I can't print this... I bring it into Cura and slice it and everything looks great... but when I print it on my Ender 3 S1 Pro... about 3/4 of the way thru the tail goes nuts. Does anyone have a brilliant suggestion?

zou3d
>>93352421

This must be something in the Z axis structure, when this happens with some of my printers I tighten the screws and apply some lubricant to the moving parts

William Hargraves
>>93352421

yes use prusa not cura, there are profiles for the ender3 s1 pro on prusa and there stock profile will most defiantly are better than cura's are . i print these on a 0.24mm layer height in 1 hour and 37 minutes . these are a amazing little model my guess is, the couple little errors in the model your version of cura cant pick up where the newest version of prusa does and is able to repair them and they print wonderfully

Anonymous

I have the same issue with my CR10S pro V2, using Prusaslicer. The rear section of tail breaks loose from the bed and wobbles around during the end of the print, ruining it.

Anonymous

I am having the same issue on my ender 3 v2 what was everyone's solution? I got 3 to print initially but since then had half a dozen fail.

Anonymous

Try some Aqua Net hair spray on the build plate. It fixed my issue with this and other prints that had the same issue. My main build plate is a textured PEI with Aqua Net.

zou3d
>>95023663

Is your printer coming off the build plate or printing wrong? let's investigate this

zou3d
>>94989603

Is your printer coming off the build plate or printing wrong? let's investigate this

Anonymous
>>95023663

Most of the build sticks, it just seems half way through the tail loosens then messes up

Anonymous
>>94989603

The print was partially coming off of the build plate. Just the rear tail section, to be specific. I applied Magigoo to the build surface, and that solved the issue. I've never needed to do that on my textured build surface, but I think the surface area that contacts the build plate is just a bit too small to hold the part otherwise.

William Hargraves

i have just got these little guys into my local candy and sweets shop we are very excited here at Coastal Kustom Creations as our business Continues to grow and this little axo is where it all starts . A big thanks to all the team and ZOU 3D for your tremendous Work