Home
Artists
Search Recent Random
Posts
Search DMs Popular Hash Lookup Tags Random
Importer
Import FAQ
Register
Partychan Matrix ThePornDude
Home Artists Posts Import Register
The Offical Matrix Groupchat is online! >>CLICK HERE<<

Patrons-only thread for tonight's livestream (Patreon)

Published:
2018-02-16 00:44:22
Imported:
2021-09

Content

Here is the thread where you can post questions for tonight's Q&A livestream, starting in about 15 minutes (on the hour).

Comments

Anonymous

why does the video link say 11:00 pm?

Anonymous

I guess the only question I would have for you is....... after building a custom build 5 inch (or whatever) how should I test to tune? Try and fly with stock config or use someone else's tune. I recently finished my first build.......now what?

Anonymous

Hey man I know BF3.3 is coming out in a couple weeks. Are you excited about 32k gyro sampling filters? I'm thinking about swapping out my Matek F405-CTR (MCU-6000 gyro)for a F722-STD/FCHUB-VTX combo (ICM 20602 gyro). Also, do you think F7 is necessary yet with BF3.3?

Anonymous

I would like to know when you will be experimenting with Crossfire, and what your thoughts are on long range / gps builds. Thanks JB!

Anonymous

Building a Norris but the 3.3/5v solder pads came off on the Bardwell f4. Not sure if this is what caused my magic smoke, or I may have overloaded 9v regulator when I attached my camera and vtx to the same 9v pad. Could I have overloaded it? Vtx is akk x2, camera is runcam micro 2

Anonymous

Why is there still no decent software in existence, that can tune a custom quad to near perfection (apart from Gtune, but that's really not up-to-date). I mean, we have machine learning nowadays and all that amazing AI software...just throw a bunch of blackblox-logs with different pid on it and it'll do its thing :D

Anonymous

Which low esr capacitor should I use for individual ESCs ?

Anonymous

One more, since you have been using the X10, what conclusions can you make at this point?

Nicolas Myers

Is FrSky "SBUS" different from Futaba "SBUS"?

Anonymous

Where do I watch the stream

Anonymous

I just built my first quad. The motors are spinning in the correct direction. I believe the props are on correctly as well. When I arm the quad it goes crazy and flips over. Any aggregations.

Anonymous

Hey man, what happened with that occusync drone?

Anonymous

Joshua, since you found some utility from the Tiny Whoops &amp; the 2 inch quads, can you imagine what the transformation of 7, 8, 9, 10" quads might look like going forward?

Anonymous

Tell the quad fairy story!!

Anonymous

What do you think of Drone Mesh's tests of the Tekko32 4in1 35A ESC? Looks really amazing to me! <a href="https://www.youtube.com/watch?v=i6-LHvcp0gI" rel="nofollow noopener" target="_blank">https://www.youtube.com/watch?v=i6-LHvcp0gI</a>

Anonymous

What do you think of 2405 motors by Hobbywing XRotor motors?

Anonymous

are you testing the TBS crossfire nano yet?

Anonymous

what would you suggest I do about breaking frames I've broken a cheap amazon one (like 16 bucks) and the second one i broke an arm and sandwich plate on my IFlight XL5 they sell the arms but not the sandwich plate and with shipping it costs about the same to just buy a whole new frame on amazon plus faster shipping.. sorry about that tangent. but the question is what do you recommend I do to stop breaking frames or should I just git gud?

Anonymous

no audio

Anonymous

Can't hear him!!!!!!!

Anonymous

No audio here either

Anonymous

Can you repeat the last 2 minutes

Anonymous

no you are doubled

Anonymous

there he is

Anonymous

Just JB and chat in video

Anonymous

and gone

Anonymous

can't hear him

Anonymous

Still no audio

Anonymous

no audio

Anonymous

Can see him... Still can't hear him

Anonymous

can here him but very low

Anonymous

I’m diving into the 6S and low KV world. What’s your recommendation for a FC and ESC that can handle 6S?

Anonymous

Will you be making a F7 Board?

Anonymous

Is it possible to setup smart audio and telemetry on the Babyhawk-R if you replace the RX and vtx? (IE does the FC support it with uarts ETC)

Anonymous

Please put a thermal cam on a VTX and see if it's flyable.

Anonymous

Joshua, since you found some utility from the Tiny Whoops &amp; the 2 inch quads, can you imagine what the transformation of 7, 8, 9, 10" quads might look like going forward?

Anonymous

Hey Josh, I am planning a new build using your AIO board. A Chameleon 5" frame with 2306/2700 motors - What ESC setup would you recommend?

Anonymous

Crossfire Micro is listed as a 4 channel receiver. Does that mean that I can't run any switches, only Throttle, Yaw, Pitch and Roll?

Anonymous

Did Bob Roogi copy the Sky-Hero OB1 frame?

Anonymous

What type of Crossfire videos will you be doing?

Anonymous

Where did you get the led lights that are at you workbench.

Anonymous
>>10179238

Its a full 16ch receiver, the 4ch thing is for servos IIRC.

Anonymous

Would you suggest upgrading the guts to my 2014 X9D to the Plus Standard? I've already changed to M9 Gimbals, but am having issues with running LUA scrips. The basic Betaflight LUA wont run. Or just buy a Horus X10S? The radio works fine other than the Lua Script Issue.

Anonymous

Ive been running Kiss+KissESCs - switching up BF now with the JB AIO. I don't want budget ESCs. I want the best you can get. Any ideas?

Anonymous

On 3.3, talk to us about cutoff freq. Sounds complicated and do you think the official release will have this figured out. Sounds like now everyone is using Blackbox log to find there cutoff freq. Q/R values

Anonymous

I dont think there is a 9v pad looking at the board. Could it be a misread G ? [disregard he literally just said the 7.6 was changed to 9v]

Anonymous

Any news on the new FRsky radio, or the Black Knight radio ?

Anonymous

How about a fund raiser giveaway for the X10 for some charity.

Anonymous

maybe this is too big for an straight answer, but from time to time the quads I build, on angle mode tend to drift and the drift is exponential over time, all components are new, BF 3.2 I calibrate acc each time, even I do a hot calibration adjusting acc angle using transmitter so, any possible path I can follow?

Anonymous
>>10179890

Maybe this will help. There's a followup video as well <a href="https://www.youtube.com/watch?v=otJNzZrE-yk" rel="nofollow noopener" target="_blank">https://www.youtube.com/watch?v=otJNzZrE-yk</a>

Anonymous

Will you be making a F7 Board and What do you think of 2405 motors by Hobbywing XRotor?

Anonymous

quad arms and motors run at idle. When throttle stick is raised, the motors spool up, however, they then continue to throttle up even when the throttle stick is lowered. At that point, the throttle stick is no longer working. Pitch and Roll inputs continue to work. This happens with and without props. Any idea what would could cause this? Flysky radio and receiver, it worked until friend crashed in snow. After drying out over night he still has this issue. He mentioned that he had a hard crash as well a day or two earlier. Outside of checking receiver tab in betaflight any other things to check? Possible bad receiver? Thanks!

Anonymous

Just bought a LaForge V3 a few months ago... Did the diversity module change with V4 or just the main? In other words if I only bought a new main would I get all the new features even with the V3 diversity module?

Anonymous

Probably late to the game here. Do you know what would cause my Betaflight OSD to disappear when I raise the throttle? It reappears when I throttle down (below 25%).

Anonymous

Oh Josh.........

Anonymous
>>10180338

I remember having same issue.. project blue falcon had a clip on youtube. I solved it when I had vtx and camera sharing the same ground.. when i had vtx ground from battery pad and camera ground from vtx.. then when I pushed throttle the osd disapeared.. but solved it when vtx and camera shared same ground.. hope this helps

Anonymous

Thank you for everything you do!

Anonymous
>>10180306

Same question, but I've got the V2. I can only find feature changes

Anonymous

what esc's would you recommend for your fc

Anonymous

Good resources for GPS, specifically Neo-6M and F3 controller.

Anonymous

Still on the LaForge topic... will upgrading both modules to the V4 offer better reception and resistance to bleedover than the V2, or just more features?

Anonymous

Brian R Bourdeau Would you suggest upgrading the guts to my 2014 X9D to the Plus Standard? I've already changed to M9 Gimbals, but am having issues with running LUA scrips. The basic Betaflight LUA wont run. Or just buy a Horus X10S? The radio works fine other than the Lua Script Issue.

Anonymous

Thanks for the answer although I was hoping it wouldn't be hardware. I'll test out the transmitter inputs on the receiver tab and probably try a new receiver. Thanks!

Anonymous
>>10179464

Hey there is 2.2 or load the two LUA options and it will work.

Anonymous

What are your thoughts on the Shendrones Ichabod? Thats the 6" frame for the full size GoPro that Nurk has been using as a chase quad.

Anonymous

Does Parallel charging batteries degrade them faster than individually charging?

Anonymous

Do you think the FrSky Xlite will be a nice transmitter? I’d like to see what you think of it, and hope you get one to test early

Anonymous

Trying to set up X9D to change modes with ch6 on Tiny Whoop Racer. IrangeX irx4. Any hints?

Anonymous

Had to look it up as I am not on my computer I use to flash my transmitter. Flash your controller, under build options check NOHELI,LUA, and LUAC

Anonymous

Heh. I like you on the Q and A stream it's like your videos, but on remix.

Anonymous

So I got a new vtx and it drops out after about 50 feet to just a noisy screen. I have checked antennas and cannels. What kind of troubleshooting can I do?

Anonymous

My taranis has lost the bootloader. When i power it up with the trim held down the screen lights up but no menu. Any help?

thedroneracingengineer
>>10180373

Hey Brian. Just in case you missed it, sorry for overlooking your question. I didn't realize I needed to reload this page and I was missing a bunch of messages.

Anonymous

Hey Joshua looking to order some crossfire gear but can not find it on any of your affiliate links. any idea where I can get it so you get credit?

Anonymous

Hi again Joshua. I have an omnibus F4 pro corner build with the ICM gyro and I’m really struggling with mid throttle oscillations the board isn’t soft mounted, which people are telling me to do, but I’m reluctant to softmount a board that has a soft mounted gyro. What are your thoughts? Thanks buddy, excellent livestream BTW, your financial supporters are really getting their money’s worth!

Anonymous

your good

Anonymous

Hey Joshua, any info about the upcoming FrSky Xlite? Will you be getting one to test?

Anonymous

I know why - Quad pilots spend all their cash on parts. Gamer stream viewers never leave the house...!

Anonymous

Hi Josh I just bought some fatshark hd3 brand new supposedly on ebay but when i have powered them up i see there is a spec of dust in the left hand side behind the lens, same problem as you had i live in Australia, not sure if there is a service agent here i guess i need to send them back to USA for repair? or should i do what you did ? i am a mechanic so i know how to pull shit apart.

Anonymous

"35 DEGREES before and a little less now." Thank you Willy. So is it 25, 30, 32?

Anonymous

Bruce, rcmodelreviews is workign on it

Anonymous

lol... beat me to it

Anonymous

Josh what happened to that occusync drone you made? (sorry if you saw this in the last 30 mins i was afk

Anonymous

What is the down side to going with a High KV motors.

Anonymous

Joshua - are you aware you have a Polish look-alike ??? <a href="https://www.youtube.com/watch?v=OPhLlr8Ow3A" rel="nofollow noopener" target="_blank">https://www.youtube.com/watch?v=OPhLlr8Ow3A</a>

Anonymous

Here is an idea. Flip 2 of the wires on the pads of the esc during design.

Anonymous

JB, where is the best spot to solder a capacitor in order to clean the video signal ?

Anonymous

With the high 2850 KV 2405 motors is better to lower pitch 2 blade props to minimize amps?

Anonymous

Thank You

Anonymous

Smoked one of my RCX 2206/2400 motors with the BLHeli32 Wraith32 35A ESC's on my iFlight Transframe X5 build after flying several packs with no problems. All motors and ESCs were cool. Any advice on the best way to diagnose the cause?

Anonymous

Great show

Anonymous

Have you watched the new star trek discovery?

Anonymous

Hi Joshua do have the indestructible quads Gold Label HV in your testing lineup ?

Anonymous

Great show Joshua, thanks for all the info, keep 'em coming. Next week lets make it 6 hours, lol.

Anonymous

You are awesome... LOL 6 hours

Anonymous

Why did you put the inputs for receiver on forward side of jb f4 fc board? I always find having wires running across fc a hassle with battery straps and like avoiding having any. Also would live to see your thoughts on wiring your fc with the new Aikon 4-in-1 AK32.

Anonymous

Can you spear-head getting the industry to standardize on using interconnects on the FC like the m8cro SMI 1.5mm connectors that are already in the cameras and ESC and Receivers? Why can't we at least move all the signal wires to a standard connector series to make life easier?

thedroneracingengineer
>>10243742

Wiring for a 4 in 1 is described in the manual of the FC. Download from the RDQ product page. The layout of the board is dictated by available space. There just is only so much to go around.

thedroneracingengineer
>>10243879

This is happening somewhat with 4 in 1 ESC's. But even there the connectors vary. Some have 5v, some have vBat, some have current sense. Every FC has different capabilities. Board space is at a premium so nobody wants to waste space on a connector for a function they don't use. The main advantage of a defined plug interface is interoperability but what motivation does an FC manufacturer have to interoperate with another company's equipment? That's why you see 4 in 1 ESC's coming with standard plug headers: because they are motivated to interoperate.

Anonymous

I'm a bit confused with the current output function on the Aikon 4-in-1 . Why is it There? I mean I can get overall current sense from the FC AND I can use the ESC telemetry output for individual ESC sense readings. Do I just ignore this thing? If it is because some people don't have the ability to use ESC telemetry, it seems odd that this output is now beeing added at a time when telemetry is being pushed forward in new hardware.

Anonymous

I'm a bit confused with the current output function on the Aikon 4-in-1 . Why is it There? I mean I can get overall current sense from the FC AND I can use the ESC telemetry output for individual ESC sense readings. Do I just ignore this thing? If it is because some people don't have the ability to use ESC telemetry, it seems odd that this output is now beeing added at a time when telemetry is being pushed forward in new hardware.

thedroneracingengineer
>>10250115

It simplifies wiring dramatically. Instead of having to run the main power leads through the FC/PDB, you can run the battery to the ESC and simply run the (small gauge) current sense wire to the FC.

thedroneracingengineer
>>10250115

Almost no 4-in-1 ESCs support telemetry output currently. But I agree current sense output would be a bit redundant in that case.

Anonymous
>>10250115

OH? I need to learn more about this!!! Does this allow me to eliminate that nasty wiring of the +BAT on the Shunt resister on the FC to get Current draw reading on the OSD through the FC?

Anonymous
>>10250115

Does that Current lead coming from the 4-in-1 go into a RX port of the FC? There doesn't seem to be much information out there about what is on this line. Is it some analog signal or is it a digital protocol line?