Fae Wolf Dragon! (Patreon)

This was an JULY Design and has been Archived! If you were subscribed in JULY, you will receive an email from MyMiniFactory within the week to access the archived files from that month. If you are starting your Subscription in August 2024, Welcome! Your exclusive models are available immediately in the Exclusive posts (link below) and the AUGUST Models will be in the AUGUST posts tab as they come out over the month! https://www.patreon.com/cinderwing3d?filters[tag]=Exclusives

If you missed this model or any others they are available on MMF for purchase! You can get the most up to date discount code on the Welcome and Info post!

https://www.myminifactory.com/users/Cinderwing3D?show=store

-----------------------------------------------------

UPDATE 3: There is an updated Open Wing file VERSION 4 attached below. I have made more support crystals at the base of the big wing and another additional connection farther up for those of you who are having using with the filament printing correctly up the wing. Also remember, there is a Close Wing version (where there are no open holes) which is easier to print.

If you are still having issues please read the below helpful steps that one of our Testers, "Silver", has outlined:

*Wings failing? Here are some suggestions:*

- NOTE: this is geared towards Bambu printers, as these have mostly been the ones having issues. However, many of the general principles should be applicable to other printers as well.

- Make sure your cooling is at 100% when printing PLA. On the A1 series printers, the part fan cooling defaults to 80%. Go into filament settings and set that to 100% anytime you are printing PLA

- Slow down your overhangs! Find the speeds that we suggest in the image below (attached to the post please note screenshot is from Orca but the speeds are the same! You will be missing the slow down for curled overhangs checkbox in Bambu Studio)

- Use a brim. Recommended brim settings: gap of 0.2-0.4mm, width of 5-6mm

- If using a textured PEI plate, make sure it is clean. Wash it with soap and water, dry it with a paper towel. Do not use glue/hairspray on a textured PEI plate when printing PLA, glue is a release agent and does not improve adhesion.

- Dry your filament, even brand new filament can/will be wet. Dry for at least 8hrs at 50C.

- Tune your filament: flow ratio in particular is important.

UPDATE 2: Fixing one fuse created another, oops. It is 100% fuse free now! Sorry y'all!

Update: a VERY small fuse was found, this has been fixed. :) This was only on the open wing version, please download V2!
-------------------------------------------------

Hi Cinders!

I have a new Wolf Dragon for you all:::: the FAE WOLF DRAGON! 

The original Wolf Dragon had pop in wings, and by popular request, I have made this an all in one print with no pop-ins! Like all wings this style, simply rotate and fully expend the taller wing part out to hold them in place!

Also - as a fun bonus I made two wing renditions for you all! Closed Hole Wings and Open Hole Wings! The Open Hole Wings have cut outs in the wing design and print well with little overhang.

The filament used is ZIRO Pastel Spectrum, but it does look like it is out of stock at this time.

Thank you all! Next release will be in about a week! Stay tuned! :)

- Tracy

----------------------------------------------------

All my designs are print-in-place and require no supports. All you need is a clean bed and you're off!

Print Settings:  .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts)

Any errors regarding floating regions can be safely ignored. If you are having issues with the hole wings please check your cooling and overhangs!

Please join our discord chat below for more help and discussions.

Filament: https://www.amazon.com/shop/cinderwing3d

------------------------------------------------------

JULY 2024 Models:  HERE

• Tiny Squid - RELEASED

• Tiny Starfish - RELEASED

• Fae Wolf Dragon - RELEASED

• Secret Design

• Secret Design

-------------------------------------------------------

PLEASE READ

Please remember, NO sharing, re-selling, or distributing this digital file or modifications of it in any way.  Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.

Please see WELCOME POST for questions, all exclusive releases, and links:  https://www.patreon.com/posts/welcome-to-info-71819754

All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections

Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d

For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!

Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!