Apollo Mini (dual 4010) (Patreon)
Downloads
Content
Finally finished it. (and thanks to KtotheStank for testing it)
I made it so that I can relatively easily convert any Apollo currently supported hotend into one of these. So feel free to submit requests
Front fan is a 4020, but spacer included for a 4010
Currently supported
- Dragonfly BMS
- Stock Creality / Microswiss
- DropEffect XG
- Bambulab Hotend
- NF Crazy & Magnum (original not plus or pro)
- Mosquito & Mosquito Magnum
- Taichi
Supported Direct drive setup (and of course bowden)
- Orbiter 1.5
- Orbiter 2.0
- Sherpa Mini
- Sherpa Micro
- BMG
- Vz-Hextrudort-Low
Mount - same as Apollo
- stock backplate on wheels
- linear rails (front mounted)
- BTT hermit crab
All the render in the zip are pulled from the apollo zip. but the similarity should make sense.
Fans are held without screws.
------
rev1.1 - Feb 25, 2023
made left fan, easier to install
rev 1.2 - Feb 26, 2023
"dual ears" model for left (or dual) handed cable routing.
rev 1.3 - Feb 26, 2023
Added bambulab hotend
rev 1.4 - Feb 28, 2023
Added Mosquito and NF crazy
rev 1.52 - Mar 11, 2023
Added Taichi - dual direct drive (orbiter 2 or sherpa )
rev 1.61 - Mar15
cleaned up the zip tie holes, and small missing piece left of the front fan
added a revised bltouch mount - untested
NF crazy Magnum
rev 1.7 - Mar 18, 2023
Added dragonfly BMO
rev 1.8 - Mar 21
Added beacon mount, ducts to go with it will come soon. (if you have one let me know and I'll do it sooner)
Added Stock bowden setup with large opening on top.
rev 1.9
Added v6/revo6 model (wheels setup only, send a request for linear rail model, as it's not a strait forward update)
Updated CRtouch mount (brings the CRtouch closer to the body)