Mars Orbiter (STLs) (Patreon)

• dual 5015 blower
• No print support and easy to print.
• Added rigidity with a two part print
• Printersender3 ender3pro ender3v2 CR10 microswiss direct drive mounting plate any printer with 20x20 aluminum extrusion on X, you can by an aftermarket ender3 mounting plate for cheap on ali
• does not reduce printing surface area!
• Can be used with or without a direct drive system (aka bowden setup)
• Direct Driveorbiter extruder 1.5 orbiter extruder 2.0 sherpa mini BMG (use orbiter extruder 1.5 shroud for mounting points) microswiss mounting plate and direct drive (use stock hotend or dragonfly BMS with your own spacers) some self printed ones that attaches on the wheel axles
• hotend fan can be 40x20 or 40x10 ( 10mm spacer included in files )
• adxl mount ("cheap" one and adafruit one)
• BLtouch, CRtouch, 12mm & 18mm probes (like EZABL)
• swappable probes version or integrated BLtouch/CRtouch version
• Hotends:stock hotend dragon (rigid mounted) dragonfly BMS dragonfly BMO (rigid mounted) E3D v6 microswiss Direct drive hotend (linear rail confrimed, v rollers unconfirmed ) Slice Engineering copperhead (unconfirmed) Phaetus Rapid HF rigid mounted (unconfirmed)

Some specific setup supported but untested

• BIQU Hermit Crab + Phaetus Rapido + orbiter 1.5 mount (Mars Orbiter 2.0 will have full support for BIQU Hermit Crab and all currently suported hotend )
• Printermod MDD v1.3 for ender3v2 + dragon + orbiter 1.5 mount

Updates

jan 18: 

thickened bltouch cable tidy prongs, reducing chances to break