Endor Bunker (Patreon)
Published:
2023-05-01 12:00:09
Imported:
2024-06
Downloads
Content
It's been over two years since I posted my V2 of the Endor Bunker, but I felt it was time to rebuild from the ground up.
You can get away with 20% lightning infill (Slicer: Cura) on the outer walls for faster printing. For everything else use traditional infill at around 12%
I recommend shorter layer heights (.12mm-.16mm) and slower speeds (50-60mm/s) for the detailed pieces.
Recommended filament is: https://amzn.to/3VmouoD