Hoth Computer Station (Patreon)
Published:
2021-06-27 00:14:18
Edited:
2021-08-06 00:35:44
Imported:
2024-07
Downloads
Content
PRINTING GUIDE:
You'll need these 4x6" acrylic panels. Print a single layer of the blue design onto the print bed as a placement guide, peel off the protective layer and tape the acrylic into place. Adjust the bed and print another few layers onto the acrylic. Keep an eye on it and level the bed as necessary. Sandwich the blue layer between another piece of acrylic (be careful of dust and fingerprints on the inner layers, wear gloves if you can), and jam it into the slot in the computer. Then clip on the top piece.