NalulunaCounters (Patreon)
Downloads
Content
Description
This is a mod that displays a triple counter HUD at the bottom of the screen. The following mods also need to be installed.
- BS Utils
- BeatSaberMarkupLanguage
- SongDataCore or SongDetailsCache (Option)
If you want to use the pp counter, you need to install SongDataCore or SongDetailsCache mod. There is no problem with the operation of other counters without it.
- YUR Fit Calorie Tracker (Option)
If you want to use the Activity counter, you need to install YUR Fit mod. There is no problem with the operation of other counters without it.
(If you have YUR on Steam installed, you don't need the YUR Fit mod)
Counters
Left: Accuracy
- current accuracy / personal best
- fill in with the current accuracy
- white cursor at personal best position
- glowing when exceeding your personal best
- rank color (SS: blue, S: green, A: yellow, B: orange, C,D,E: red)
Center: Progress
- current time / time left
- fill in with the current time
- coloring depending on the notes density at the map position (see below)
- past fail (game over) point marked with a red x
Right: Notes
- miss / notes left
- fill in with the spawned count
- glowing during full combo
PP (ScoreSaber)
- Current pp / Personal best pp (estimated value)
- Same as accuracy counter for non-ranked maps (can be changed in settings)
- If the rank data is not yet available for a map, such as immediately after adding, it will not be recognized as a ranked map
Activity
- Heart rate / Calories burned today (YUR Fit)
- If you want to use the Activity counter, you need to install YUR on Steam or the YUR Fit mod. I would rather just use the app version and not install the mod.
- By default, it displays the estimated heart rate from the YUR Fit mod. If you want to show your real heart rate by a smart device, please set up Pulsoid (see below) or NalulunaCountersHelper
Pulsoid
- Pulsoid is a web service that allows you to make your heart rate monitor available to OBS and other apps.
- The basic flow is as follows: register Pulsoid account ( https://pulsoid.net/s/OFepG ), set up your smartphone app to send heart rate data to Pulsoid, and use the URL obtained from Pulsoid in OBS and other apps. Please refer to the following for compatible devices and how to link them
https://www.blog.pulsoid.net/monitors
- For NalulunaCounters, open the Widgets page of Pulsoid
https://pulsoid.net/ui/configuration
Copy the "Feed reference" (https://pulsoid.net/v1/api/feed/...) at the bottom of the page and set it to "activityCounterPulsoidApiUrl" in NalulunaCounters.json.
Example:
C:\Program Files (x86)\Steam\steamapps\common\Beat Saber\UserData\NalulunaCounters.json
----
"activityCounterPulsoidApiUrl": "https://pulsoid.net/v1/api/feed/..."
----
Notes Density (Progress)
The numbers are NPS (notes per second).
0: gray (no notes)
2.5: green
5: yellow
7.5: orange
10: red
12.5: magenta (red-purple)
15 and above: purple
(Colors are not fixed, it can be in between if the number is in the middle)
Note
- The glowing color is available only when the bloom setting of Beat Saber is ON
- Not shown in multiplayer mode
- If you have a highscore with Modifiers (options that increase the score like ghost notes) enabled, your personal best may be higher than 100%
- Misses are counted only for notes, not for bombs or wall hits
- If you fail a map with a score of 0, it's not recorded as a fail
Download
NalulunaModAssistant
https://www.patreon.com/posts/74489335
NalulunaCounters 0.1.0 or later are available with NalulunaModAssistant.
Old version
NalulunaCounters 0.0.49 for Beat Saber 1.24.1
https://www.patreon.com/file?h=51951623&i=11682413
If you need a older version, contact me via Pateron message.
Old updates
0.0.48
- In pp counter, when it is set to not show accuracy for non-ranked map, the circular gauge will also not show accuracy (it will remain gray)
- Added a preview button in the settings screen
0.0.47
- Support new ScoreSaber pp curve
0.0.46
- Fixed a bug that ActivityCounter heart blinking sometimes slowed down
0.0.45
- Fixed a bug that prevented it from loading without SongDetailsCache
0.0.44
- Support new ScoreSaber pp curve
0.0.43
- Fixed a bug that the display not appeared in solo play after multiplayer
0.0.42
- Support Beat Saber 1.20.0
0.0.41
- The color of the light emitted at maximum can be changed by editing the json file
0.0.40
- The correspondence between accuracy and display color can be changed by editing the configuration json file. colorForScore is used to describe the color and accuracy (e.g. 0.9=90%).
0.0.39
- Fixed an error when working with SongPlayHistoryContinued and YUR Fit mod
0.0.38
- Adjust pp Counter for newer pp curve
- Fixed a bug that prevented it from loading without SongDetailsCache
0.0.37
- Adjust pp Counter for new pp curve
0.0.36
- Added the setting to adjust the transparency of the left and right panels of the built-in HUD (not displayed on official platforms that do not originally have panels).
0.0.35
- Show/hide and adjust the position of the built-in HUD.
0.0.34
- Added support for SongDetailsCache, so that pp counters will work if either SongDataCore or SongDetailsCache is installed.
0.0.33
- Support SongDetailesCache mod. PP counters will work if either SongDataCore or SongDetailsCache is installed.
0.0.32
- BetterSongList mod no longer showing a message about SongDataCore
0.0.31
- Display and record fail points without SongPlayHistory
0.0.30
- Add "Show Rank" option in "Accuracy" tab
- Add "Show Notes Cut Count" option in "Notes" tab
0.0.29
- Activity counter can now get calories/heart rate from YUR steam app
0.0.28 for Beat Saber 1.16.4
- Update for SongDataCore change
0.0.28
- Fixed a bug that prevents a scene change when pressing the OK button in Settings if pp counter is enabled