2015 Ford F350 Platinum SRW V5 (Patreon)
Content
FS22 Only!
Once again, I wasn't planning on another update for this rig for a bit. However, the same supporter that brought up the issue on the second gen found an issue with this truck. It has been fixed along with a few other small issues I found.
Features:
V5
- Fixed rear sliding window placement in multiplayer
- Fixed the players hands not moving correctly
- Fixed positioning of the players body
- Fixed the GoLight from rototating improperly
- Fixed some of the interior shell clipping on the outside of the truck cab
- Fixed the gap between the steering wheel and the steering column
- Fixed farm use plate from clipping throught the front of the stock bumper
- Removed rigid toolbox option
- Added adjustment to the Geny drop hitch (mouse buttons control it)
- Added LED reverse light housings to the ranch hand rear bumper
V4
- Fixed mirror base not getting dirty
- Fixed the dirt maps for the base of the mirrors...they get dirty properly now
- Fixed the dirt maps for the tailgate handle plastic
- Fixed the ford logo on the hub caps
- Fixed the mirror lights base color not being chrome
- Fixed some issues with the mapping for the body...no longer has shading going multiple ways on the body panels
- Fixed / adjusted axles and frame not being centered under the truck
- Fixed / adjusted axle and frame width to be more realistic
- Fixed / adjusted all wheel and tire widths to adapt to axle being properly centered
- Fixed trailer wiring connector that was floating
- Fixed / adjusted interior shell sticking out of the rear window..no longer does so
- Fixed hitch points being too low and causing clipping
- Fixed Tailgate being see through..no longer see through. Put proper sides of tailgate on it.
- Fixed inside bedsides of taillights being see through...no longer see through
- Fixed custom grill lights not being textured properly
- Fixed some issues with the i3d file
- Fixed some issues with the xml
- Fixed all previous texturing issues
- Fixed all errors in the log
- Made the tint brow normal glass. It is no longer color matched to the truck
- Lowered the truck to a more realistic height
- Replaced old Go Light with new one
- Replaced old magnet antenna with new one custom built by me, RMM
- Rebuilt old tailgate emblem in blender
- Adjusted the base color of the f-350 hood badge to chrome. It still lights up. however it is more aesthetically pleasing this way
- Adjusted the bed strap positions...rear one is no longer clipping the tailgate
- Adjusted the position of the front wheels and tires in the fenders
- Adjusted the idle and start sounds to be a little quieter
- Added new store option for hood badge (stock or light conversion)
- Added new store option for my custom made grill lights
- Added new store option for the fake platinum parts (truck is a base model)
- Added some fillers behind the body panels to give the truck a proper finished look
- Added a filler between the bed and frame to close it in...there is no more visible gap
- Added Glow maps to the interior dash and radio panels
- Added full front ranch hand (thanks to Destin from Division Modding)
- Added more Varity in the store options for the tint
- Added a lower tint strip (integrated into the tint options)
- Added the roof rack covers to the secondary color store configuration
- Added the magnet antenna base to the third color store configuration
- Added Stock lariat rim option
- Added stock lariat rim option with boggers
- Added small drop hitch
- Added farm use tag
- Added store option for farm use tag
- Added Full front ranch hand
- Added store option for full front ranch hand
- Added new song - Whiskey on Ice by Hank Williams Jr
- Messed with the hitch configurations, you can now have the gooseneck hitch by itself without any other hitches selected
- Removed old outdated CB radio
- Removed roof rack option
V3
- Added Custom Grill lights (activated by IC controls)
- Added Star lights (activated by IC controls)
- Added a new set of American Force rims on street tires
- Added folding color matched mirrors (activated by IC controls)
- Added Color matched cab lights (put them as a store option)
- Added the halo's as an IC control and removed the store option
- Rocky lights are still a store option but they are activated by IC controls in the cab
- Put the driver window, passenger window, and rear sliding window on separate ic controls within the cab
- Put the tuner on a code where the screen is only on when the truck is running
- Changed the song (Big Scarr - first time in vegas)
- Fixed some coding issues and errors
- No errors in the log other than a file size warning
- Adjusted some other small issues with the truck
V2
- Fixed some of the smaller issues the truck had originally
- Fixed all the texture issues that were presenting themselves on my side
- Added the halo's from the old fs19 version (they are their own store option...they also turn off and on with the engine)
- Added custom rear RMM trac bars to match the front
- Added color matched headlight option (Individual store option)
- Added stock f350 taillights (Individual store option so that you can change to custom ones if desired)
- Added a NLK decal to the sliding rear window (integrated into the rear window decal options
- Added triangle toolbox into the bed (integrated into bed options)
- Added a bed stack (integrated into the exhaust options...not 100% yet, will fix it completely in the future)
- Added FASS fuel system (Individual store option)
- Added a new bed option to have a setup in the bed (Integrated into bed options)
- Added the new setup into the bed as an actual setup you can run on the truck
- Added stocks and boggers as an option for the lifted setups
- Added starlight headliner (kind of janky, will update in the future)
- Added color matched bullet antenna (Individual store option)
- Added a fig newton windshield decal option
- Added a Yeti cooler to the dog box
- Added a refill trigger...in reality it's for the transfer tank but I couldn't figure out how to make it only work with the transfer tank activated. I believe you'll have to fill it with dev controls as for some reason I couldn't get it to refill at the gas stations....
- Fixed a bunch of small issues
- Fixed a few of the bed cols giving issues and not being accurate
- Cleaned up the xml a bit
- Cleaned up the i3d...it's still decently sized as there's a lot of parts on the truck
V1
- Sunroof! (Press the Z button on your keyboard to open or close it)
- Opening front windows
- Opening sliding rear window
- Full interior proper to the Platinum trim level
- Proper Platinum Badges and tailgate panel
- Accurate 2015 Platinum Stocks
- Accurate 2020 King Ranch Stocks
- Plenty of new wide's
- Brought the old lift over from fs19
- New front windshield decals (setup as own option in store)
- New and rearranged rear window decals (setup as own option in the store)
- Animated beads and little tree's (setup as own option in the store, you can remove them if desired)
- Color matched interior dash pieces
- Animated gauges (not the prettiest at the moment, I will most likely fix them down the road)
- Custom mesh grill w/ Powerstroke Logo (setup as own option in the store)
- Custom front and rear bumpers from fs19 version
- Options for color matched stock front and rear bumpers (all tied into bumper option in store)
- Option for 8ft Antenna on Camlocker toolbox
- Option for the 6.7 badges to be removed
- Option for stock trackbars or custom RMM front trackbars
- Engine options for "Stock" or "Tuned"
- White Go Light w/ wire going to cab
- Custom color matched taillights
- Exhaust options (5" straight pipe or Axle Dump)
- F350 Logo lights up
- Added drop hitch from fs19 version (Attatcher node isn't working at this moment for some reason, I will have this fixed on a future update!)
- Truck is a completely new mod, however I had to use the old store image because my Icon Generator isn't working properly
- Rock lights (one in each fender)
- Color matched windshield banner
- Color matched door handles w/ chrome handles
- Color matched tailgate handle w/ chrome handle
- Color matched mirrors w/ chrome caps
- Lower windshield brow (only applied when the darkest tint option is chosen)
- New 6.7 Sounds
- No major game affecting errors...only ones are the typical i3d file size ones
- No sound errors!
- And many other features I am currently forgetting about!
IN ORDER FOR THE INTEGRATED CONTROLS TO WORK PROPERLY YOU MUST DOWNLOAD SIMPLE IC...I will attach a link for it below. You will need to go to your keybinds in farming simulator and set it to some unused keys on your keyboard.
Simple IC Link: https://fs22.com/farming-simulator-22-mods/scripts-and-tools/simpleic/
I appreciate the continued support! Let me know if there are any issues that are found that I didn't state.
Link: Direct message me for link if you are a new subscriber!