Home
Artists
Search Recent Random
Posts
Search DMs Popular Hash Lookup Tags Random
Importer
Import FAQ
Register
Partychan Telegram ThePornDude
Home Artists Posts Import Register

Tweaking some old minis for better print-ability. (Patreon)

Published:
2020-05-26 14:04:53
Imported:
2021-11

Content

Now that the merchant tier is open I want to make sure that you guys have a easier time with getting consistent clean results. I know the tuning pegs on the dark god of rock and the axe and the human barbarian need to be thicker.  If you are having any other issues with any mini please let me know so I can do a little overhaul next month.

Comments

Anonymous

I love your models but they are somewhat difficult to assemble when printed at 32mm. Using ball joints instead of flat surfaces would greatly help the assembly/gluing process.

Anonymous

I primarily use FDM, so I know I'm not your typical patron, but I've been having a lot of trouble with fingers and ears on some of your models, specifically the genasi

TwinGoddessMiniatures
>>37583771

For sure, fdm printers are not the best because of all the delicate parts of my models. I do have a couple users who print them at large scale using FDM you can check out the process on the discord and ask them about their settings if you want

Marie Stevens
>>37583771

Unsure of what support settings you use, however, if possibly. I would suggest giving tree supports in cura a shot. I havn't done small scale minis on my fdm yet but, I would be using that for sure. I tried standard supports with less than preferred results. Not terrible but not the best I could get.

Anonymous
>>37583771

OP probably already tried this, but I use a 0.2mm nozzle and I've gotten more successful prints with that and low layer heights. They can still be hit and miss though

Anonymous
>>37563570

I agree here, the flat surface cuts do make some of the smaller pieces difficult to join, ball joints or peg and hole will make the joints stronger and easier.