Home Artists Posts Import Register

Content

Now that i've been without a working pen for my tablet for more than a week, i decided on doing some prep work for the future silicone dolls topic. There's an other upgrade of a slightly different kind, also in this area coming up, but this one here is about bewbs!



I'm kinda running out of materials, but had lying around 50grams of this cheapy mold making silicone left that was soon going to go bad, so i used it up for a boob test. Mocked up a bust out of clay real quick, made a plaster mold around it, which i then sanded down to get an adequate surface, and finished it off with a dozen layers of more sanding and spray primer paint. THEN it was ready for the big test!



I've spent a great amount of time carving two perfect inserts out of soft foam for the boobies, just to immediately realize right after that the planned adjustable boob size idea won't work with fixed foam pieces under the skin, so i decided to simply have bubbles inside, filled with water. The final dolls will feature tubes going to the nipples for... special effects, and tubes that i will be able to inflate or deflate the boobies through.



Been hoping that the water is gonna have enough mass to pull down the breasts, but this silicone just wasn't made for this. Also the fact that this is all in a very small scale doesn't help either, but with the right soft type silicone, it will work.



But it wasn't a pointless experiment, i've learned a lot on how the later versions should be done, so i will waste much less of the more expensive materials. I can barely wait to have a working zero gravity posed sculpt coming to life in all the different angles!



Are you too? YES?! Then...



YES, WE KNOW TC, THEN WE SHOULD SUPPORT YOUR CAMPAIGN HERE ON PATREON, BLA BLA BLAAA!...


Go-o-o-d :-)



By the way, here is the mold for this test bust:





Files

PATREON/TCprod - video001 - boob test

nope

Comments

No comments found for this post.