Mini Spool Display Shelves (Patreon)

The mini spools needed a home!

Display twenty-four of your favourite tiny filament spools in this stylish set of shelves complete with decorative awning for bonus style.  Oh, and that awning is designed for filament swapping to get stripes - no multimaterial setup required!

The shelves have little insets for the spools to reside in both the shelf itself and the back of the unit, too, to keep things nice and neatly arranged. 

The awning prints separately and slides onto the top of the shelves.  The fit is relatively firm, but will naturally vary according to the specifics of slicing and printing.  Centering features on the shelving match up with the retaining tab on the awning to make sure it sits in the right spot.

Getting Stripes on the Awning

There's no need for a multimaterial printer setup to get the stripes on the awning!  I've just swapped filament back and forth during the print so that it aligns with the curvy cusp bits.

Print Description

This is a two-part regular print.  The awning does need to slide onto the top of the shelves but there's ample tolerance.

Print Dimensions

The shelving occupies 203mm x 101mm on the print bed and is 39mm tall.

Supports Needed?

Not at all!  Designed for straightforward printing!

Scalability

This would scale quite readily up or down, but that's probably only useful if you also have scaled mini spools :P

Print Orientation

The shelf prints back-down, while the awning prints on its side so that filament swaps can be used to get stripes happening!  Obviously you can just print it in a single colour, if that's more to your taste!

File Location

You'll find this one at at 558 Mini Spool Display Shelves

Link to dropbox post: https://www.patreon.com/posts/31697592

Further Thoughts

Believe it or not, this originally had doors on the front!  Doors didn't really make it easy to actually see the contents, however, so I simplified things to make it all about the spools :)

Happy printing!

xoxo

Sven.