The Hammers are here ! (Patreon)

Well here it is finally - the Mjolnir pack :D

I know there are quite a few models out there so i had to do a bit of extra to make it worth your while.

Included are:
- Regular Mjolnir - i created the body so its easy to print without supports, and added structural strength. There is a 10mm dovel intended for the hilt, and 8x8 pins or magnets to be used at your own discretion depending on what you would like more :)

- Love and thunder Mjolnir ( both damaged and with holes for lights) - once again 8x8 pins or magnets - i recommend you close one side with pins and leave the other one to be used with magnets so you can access the electronics.
IF you dont wish to use any lights on the inside, just print the damaged one "without holes"

- regular and L&T for small scale resin printing - yup 1:6 scale made for resin printing. The opening on the hilt for the strap is still there, so if you can find some small straps you will get yourself some nice keychains :)


I've also added updated Plates for Llighthammer - however keep in mind that top plate will be a tad difficult to print - so i went over the board on the "warning" signes for that one  :D I was actually debating not to put it as aprt of the release, but oh well, the more the better :D  - taht one is in the LIGHTHAMMER FOLDER and those who have access to it will find it there :)

- WILL BE ADDED SOON:
- im working on several stands for the Hammer, so they will be added tomorrow as well :)

This is it for now, enjoy the Mjolnir pack :)

MAY FOLDER
https://drive.google.com/drive/folders/1LGQvYlP399cU72ZVkAei3FEiXbTA7BM8?usp=sharing