Ronin lightsaber - SW visions - functional (Patreon)

As soon as SW vision hit one episode, one saber stood out from the crowd, and its also the one you've asked quite allot about. In my personal opinion this was the most badass one in the seriies, so ofc i had to make it. 

Yes, the lightsaber is functional. It uses the same electronics as i "lighthammer" and "lightnarsil". So basiclly all you need to do is once again take out electronics and place it into this one. 

I had to do some slight "accuracy" sacrifice in order to make it functional. A katana would be slightlly curved but that would prevent electronics to slide in/out. One thing i also noticed is the shape/design in the show varies a bit from scene to scene but that is to be expected from an animation. 

At the botom of the saber i added cutouts/holes for sound to travel, and i also added a 25 mm and 23 mm versions to use depending on what saber you have. 

The carabiner is freely moveable so you can use a 3d printed one or your own.

Screws used are m3 x10 mm. only at the botom you can use just one m3 but longer that goes all the way thru. 

Lower 2 screws on the sides on the "blade grip" part are to combined the hilt with lightsaber blade, and upper 2 screw holes are to mount the lightsabe blade.

In there you will also find slots for two M3 nuts that can be used to tighten/release the lightsaber blade. 

I also added a hilt without the katana wraps in case you wanna add your own/real ones.

The entire hilt is oval shaped, inspired by real katana hilts, ofc as much as it was allowed due to structual integrity/electronics combo, and it felt like a big shame to put the button at the sides where the knots are, so i used their design detail on the saber to actually turn it into a place where the button/swith is/are.

Hope you like it, and yes there will be many more from SW Visions :)