Avatar Korra Figure Checklist (Patreon)

These are all the pieces that are going to be in the Tier 3 files. Tier 2 Files should be all of the parts with the "Main_" naming convention along with some of the "U_" label. Tier One patrons are receiving the main figure in lower resolution parts split into three.

If printing on FDM then I recommend printing her at 200% or higher scale. The poly tail sockets will be small and fragile if anything under that scale. Adding more printing layers on those thin areas like the pony tail and fingers will be a good idea to give it more strength.

Edit: Turns out the bases are extremely large at 200% scale, so I decided to split them up at the last minute. Image updated. Now there are more options.