The gauntlets are here :) (Patreon)

And the last piece of armor is here :) 

The gauntlets. Quite tricky to make, so let me walk you through it

First- you might notice there are details once again carved in on the side - those would feel very tricky to make, so i hope you'll find it usefull :) 

Since we are using 4x4 magnets for the DIY blasters build, i figured i'd include them in this build as well, so you dont have to order new ones. 

Gauntlets are locked together by using 8 magnets on each side, and a small "distancer".

Another idea i had was - if you use strap or leather on one end of the gauntlet you can pretty much have them "Hinged" open easly on just 1 side. 

Keep in mind - the magnets will work only if printed at 100% scale, and the sizing/fit is close to bo katan's gauntlets, so hope that helps

If you resize it you will either need to fill up the holes a bit or drill them out to have the magnets fit due to your changes

All the small parts are split for easier printing.

Left gauntlet - the knobs are included both hollow and solid, so you can use led's or glow in the dark filament for those. 

There is also a slot in the gauntlet , well, a space for electronics if you plan to use led's. 

This was quite fun, so i hope you like it :) 

Added to "sabine wren armor" build folder and available to all "we are makers" tier members