Ganyu wedding dress TexFx V1.1 (TexFx required) (Patreon)

注意，由于4.4更新更改了头发和衣服的覆盖顺序，原版会导致头纱透视后头发消失的问题，因此采用了TexFx来进行头纱的局部透明，因此这个MOD需要使用TexFx，需要注意这个MOD自带去虚化，会和Silent佬的去虚化冲突，因此安装时请删掉安装的去虚化
Note that due to the change in the coverage order of hair and dress in the 4.4 update, the original version will cause the problem of hair disappearing after the headdress is perspective exposed. Therefore, TexFx is used for local transparency of the headdress. Therefore, this MOD requires the use of TexFx. Please note that this MOD is incompatible with the Remove Transparency Filter by SilentNightSound. Therefore, please remove the installed Remove Transparency Filter during installation

-------------------------------------------------------------------------

前瞻刚过，恕我直言，这次原神的前瞻直播，负分(bushi)，主要没啥惊喜内容
一刻也没有为春节前瞻的循规蹈矩哀悼，立刻赶来战场的是，Kono Sora da（误）
一直想做甘雨的花嫁MOD，但都各种耽误了，这个MOD也参考了香蕉网上的悬赏的下面那张图，但甘雨毕竟老角色，没有透明贴图能用，也没有extra的层，只有一个dress层能有背面UV，但这个层又要用来弄半透明，导致有些地方不得不妥协，做的不是很满意（希望甘雨的新皮肤能有更多好用的层）

I have always wanted to do the wedding dress MOD for Ganyu, but it has been delayed for various reasons. This MOD also referred to the picture below the reward on Gamebanana. However, Ganyu is an old character with no transparent texture or extra layer to use. Only dress layer can have the back UV, but this layer needs to be used for transparency, which has led to some compromises and unsatisfactory results. (hope Ganyu's new skin can have more useful layers)

总共做了120个差分
按ctrl+H切换衣服（裸、奶盖、无透明奶盖、衣服00、衣服10、衣服11、透明衣服11、衣服21、透明衣服21、衣服11+透明裙子、衣服0+裙子、衣服1+裙子、透明衣服1+裙子、衣服2+裙子、透明衣服2+裙子，详情见下图）
按ctrl+↓显示/隐藏鞋子
按ctrl+←显示/隐藏丝袜
按ctrl+→显示/隐藏胖次
按ctrl+↑显示/隐藏头纱
有问题欢迎留言

A total of 120 differentials were made
Press ctrl+H to toggle clothes (nude, breastcover, notrans breastcover, cloth00, cloth10, cloth11, trans cloth11, cloth21, trans cloth21, cloth11+trans skirt, cloth0+skirt, cloth1+skirt, trans cloth1+skirt, cloth2+skirt and trans cloth1+skirt, details can be found in the following figure)
Press ctrl+↓ to show/hide shoes
Press ctrl+← to show/hide stocking
Press ctrl+→ to show/hide pants
Press ctrl+↑ to show/hide headdress
If you have any questions, please feel free to leave a message.

---------------------------------------------------------------------------------------------
下面是对于透明的说明（头纱部分的透明度请参考001序号文件夹中TransparencyMap贴图的颜色，黑→红，越红越透明）：
打开merged.ini文件，找到下面这一段（使用genshin_merge_mods.py合并mod的时候同样将这部分加进ini文件就可以恢复透明）

; Custom Shaders ----------------------------

[CustomShaderTransparency]
blend = ADD BLEND_FACTOR INV_BLEND_FACTOR
blend_factor[0] = 0.6
blend_factor[1] = 0.6
blend_factor[2] = 0.6
blend_factor[3] = 1
handling = skip
drawindexed = auto

其中的0.6是调控透明度的（调整时3个值一起变），范围0~1，如果需要不透明，可以将ini文件中所有run = CustomShaderTransparency替换为drawindexed = auto

Below is an explanation of transparency (For the transparency of the headdress, please refer to the color of the TransparencyMap.dds in folder 001, black → red, more red is more transparent):

Open the "merged.ini" file and locate the following paragraph (When using genshin_merge_mods. py to merge mods, adding this part to the ini file can restore transparency)

; Custom Shaders ----------------------------

[CustomShaderTransparency]

blend = ADD BLEND_ FACTOR INV_ BLEND_ FACTOR
blend_ factor[0] = 0.6
blend_ factor[1] = 0.6
blend_ factor[2] = 0.6
blend_ factor[3] = 1
handling = skip
drawindexed = auto

Among them, 0.6 is used to regulate transparency (the three values change together during adjustment), with a range of 0 to 1. If you don't need transparency, you can replace all run=CustomiShaderTransparency in the ini file with drawindexed=auto